Product ID:BEAUTYWELD, ARC
MSDS Date:03/31/1993
FSC:3439
NIIN:00-127-2613
MSDS Number: CDWZM

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

POTASSIUM HYDROXIDE (CERCLA)

CAS: 1310-58-3

RTECS: TT2100000

OSHA PEL 2 MG/M3, C

ACGIH TLV: 2 MG/M3, C

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

POTASSIUM SILICATE

CAS: 1312-76-1

OSHA PEL N/K

ACGIH TLV: N/K

CLAY (KAOLIN); (KAOLIN) (CONTAINING ING 4)

CAS: 1332-58-7

RTECS: GF1670500

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST

SILICA, CRYSTALLINE - FUSED; (CRYSTALLINE SILICA)

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: TRACE

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

FELDSPAR

CAS: 68476-25-5

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1-5%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST

CELLULOSE

CAS: 9004-34-6

RTECS: FJ5691460

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3

SIMPLY. DECOMP PRODS OF NORMAL OPERATION INCL THOSE

RTECS: 9999999ZZ

INGS, PLUS THOSE OF BASE METAL & COATING, ETC, AS

RTECS: 9999999ZZ

METAL OXIDES, CARBON & SILICA; OZONE, CARBON

RTECS: 9999999ZZ

GASES. ONE REC WAY TO DETERM COMPOSITION & QTY OF

RTECS: 9999999ZZ

AIR SAMPLE INSIDE WORKER'S HELMET IF WORN/IN

RTECS: 9999999ZZ

PROCESSES. CANS, UNDER PRESSURE, & FLAMMABLES MAY

RTECS: 9999999ZZ

SICKNESS; CHILLS, FEVER, HEAD & MUSCLE

RTECS: 9999999ZZ

SKIN DRYING & MECH

RTECS: 9999999ZZ

GEN IRRIT OF RESP TRACT;

RTECS: 9999999ZZ

MAY CAUSE METAL FUME FEVER CHARACT BY

RTECS: 9999999ZZ

ACHING OF BODY. MAY AFFECT CNS; MUSCULAR WEAK &

RTECS: 9999999ZZ

WORKERS EXPOS TO MANGANESE CMPDS SHOULD RECEIVE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:FUMES ASSOC W/HEATING, WELDING,
BRAZING, SOLDERING/CUTTING METALS CAN BE DANGEROUS TO YOUR HLTH &
OVEREXP CAN CAUSE LUNG DMG &/OR OTHER ORG DMG. USE ADEQ VENT TO
KEEP BELOW EXPOS LIMS. KEEP FUME S & GASES FROM BRTHG ZONE - KEEP
WELDER'S HEAD OUT OF FUMES. EYE/SKIN CONT:ARC RAYS & ULTRAVIOLET
LIGHT(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CAN INJURE EYES & BURN SKIN. ELEC
SHOCK CAN KILL. INGEST:DANGER! MAY BE HARMFUL/FATAL IF SWALLOWED.
FUMES:FUMES, GASES & DUSTS CAN BE DANGEROUS TO YOUR HLTH. LUNG DMG,
DIZZ, NAUS OR DRYNESS/I RRIT OF NOSE, THROAT/EYES, BRONCH ASTHMA,
LUNG FIBROSIS, PNEUMOCONIOSIS/SIDEROSIS. METAL FUME FEVER:FLU-TYPE
(ING 16)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WELDER'S.

First Aid:INHAL:MOVE VICTIM TO FRESH AIR SOURCE. CONTACT MD & ADVISE ON
INGREDIENTS. SKIN:THOROUGHLY WASH HANDS OR EFFECTED AREAS W/SOAP &
WATER TO REMOVE ALL RESIDUE. IF RASH OR BURN DEVELOPS, CONSULT MD.
EYES :THOROUGHLY FLUSH W/WATER FOR AT LEAST 15 MINUTES TO REMOVE
ALL RESIDUE. ADVISE MD OF INGREDIENTS. INGEST:CALL MD &/OR LOCAL
POISON CONTROL CENTER. ADVISE OF INGREDIENTS.

Extinguishing Media:CO*2, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:GENERALLY NONFLAMM; WELDING ARC, SPKS &
FLAMES CAN IGNITE COMBUSTS & FLAMMS. REFER TO ANSI Z49.1 FOR FIRE
PREVENTION DURING USE OF WELDING & ALLIED (ING 15)

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN WELDER TO KEEP HIS/HER FACE AWAY
FROM FUME/DUST PLUME & NOT TO TOUCH LIVE ELEC PARTS & TO INSULATE
THEMSELVES FROM WORK & ELEC GROUND.
Other Precautions:PLEASE READ & UNDERSTAND PRODUCT LABEL INFO FOR
PROPER PROCS & USE. SEE ANSI Z49.1, "SAFETY IN WELDING & CUTTING" &
CHAPTER 11 OF "THERMAL" SPRAYING, PUBLISHED BY THE AWS & OSHA
PUBLICATION 2206 (29 C FR 1910) FOR MORE DETAILS.

Respiratory Protection:IF THE WORK STATION IS NOT PROPERLY VENTILATED
TO EXHAUST ALL FUMES, VAPORS & DUSTS BELOW THE RECOMMENDED EXPOSURE
LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GENERAL & LOCAL EXHAUST AT WORK SITE TO KEEP ALL
FUMES & DUST FROM WORKER'S BREATHING ZONE & GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS &(SUPDAT)
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
SHOWER. HAND, HEAD & BODY PROT; ARM PROTECTORS, APRONS, HATS &
DARK(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PROT EQUIP:PROT CLTHG. EYE PROT:FULL LGTH FCSHLD, W/APPROP FILTER
LENS. PROT SCREENS & FLASH GOGGS IF NEC, TO SHIELD OTHERS. AS A
RULE, START W/SHADE THAT IS TOO DARK TO SEE WELD ZONE, THE N GO TO
NEXT LIGHTER SHADE WHICH GIVES SUFFICIENT VIEW OF WELD ZONE. HAZ
DECOMP PROD:CANNOT BE CLASSIFIED (ING 10)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES, GASES & DUSTS GIVEN OFF DURING
HEATING, WELDING, BRAZING, SOLDERING, CUTTING/THERMAL SPRAY
PROCESSES (SUPP DATA)

Waste Disposal Methods:DISPOSE OF WASTE MATL, POWDERS, GRINDING OR
FILTER RESIDUES IN ENVIRONMENTALLY SENSITIVE MANNER I/A/W FED,
STATE & LOCAL REGS. USE APPROP MEASURES TO KEEP AIRBORNE DUST
LEVELS CNTND I/A/W EXPOS LEVELS OF INGS. SEE SAFE HANDLING &
STORAGE SECTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.